Products Vicinay Cemvisa
- Overhead and jib cranes
- Hoists and trolleys
- Handling equipment and systems
- Elementos auxiliares de elevación
- Electro-hydraulic clamshell grabs
- G100 and G80 chains
The special alloy used in Vicinay Cemvisa chains gives them, after heat treatment, high mechanical characteristics and guaranteed protection against aging.
They manufactured rationally proportional to the loads to be lifted measures, so they are light and manageable, without compromising the ability workload.
The high strength chains are actually very lightweight compared to its resistance to breakage.
They are manufactured and tested following the protocols of the IN standards.
After the heat treatment process chains are subject to breakage test tensile and bending test. During the tensile test elongation is likewise verified before break, which for these chains must be above 20%.
Use loads are calculated with a safety factor of 4 to 1.
Vicinay Cemvisa recommends maintain and store chains in a clean, dry place to ensure reliable performance during use
- Manufactured, tested and certified.
- Tensile and bending during manufacture. Test load 100% of the links.
visual inspections and dimensional checks throughout the process.
- Safety every one link.
- Marking the links to ensure identification and traceability.
minimum elongation at break of 20%.
TABLE OF CHAINS GRADE CHARACTERISTICS 100
TABLE OF FEATURES CHAINS GRADE 80